4. Grasp the large handles on the ITB and then pull the ITB straight out of the product until it stops,
and then pull up to remove it from the product..
CAUTION: The ITB is a sensitive component. Be careful when handling the ITB so that it is not
damaged. Always place the ITB in a safe and protected location.
Figure 2-18 Remove the intermediate transfer belt (3 of 3)
Reinstallation tip If you are installing a replacement ITB, make sure that you remove all of the packing
tape and the protective cover sheet.
88 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...