4. Slide the right door (callout 1) and the arm (callout 2) in the direction that the arrow indicates to
remove them together, and then remove the arm from the right door unit.
Figure 2-111 Remove the Tray 3 right door (3 of 3)
2
1
Tray 3 right-lower cover
1. Remove the tray from the feeder, and then remove the right door (see Tray 3 right door
on page 164).
2. Remove one screw (callout 1), and then slide the cover (callout 2) to the right to clear an alignment
pin at the left side of the cover.
Figure 2-112 Remove the right-lower cover
2
1
166 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...