Tray 3 pickup assembly
Before proceeding, remove the following components:
●
Rear cover. See
Tray 3 rear cover on page 161.
●
Right-front cover. See
Tray 3 right-front cover on page 163.
●
Right-lower cover. See
Tray 3 right-lower cover on page 166.
1. Disconnect three connectors (callout 1), and then remove one screw (callout 2).
Figure 2-113 Remove the right lower cover (1 of 3)
1
2
2. Remove one screw (callout 1).
Figure 2-114 Remove the Tray 3 pickup assembly (2 of 3)
1
ENWW Removal and replacement procedures 167
To Next Page
Loading...