HP Color LaserJet Professional CP5220 - Page 222

0 mm
35 mm
42 mm
66 mm
63 mm
94 m m
76 mm
80 mm
50 mm
Distance between defects Product components that cause the defect
35 mm Print cartridge (primary charging roller)
42 mm Print cartridge (developer roller)
50 mm Print engine (primary transfer roller)
60 mm Print engine (secondary transfer roller)
76 mm Fuser (fuser film)
79 mm Fuser (pressure roller)
94 mm Print cartridge (OPC)
Calibrate the product
If you experience any print-quality problems, calibrate the product.
Calibrate the product using HP ToolboxFX
1. Open HP ToolboxFX. See
Open HP ToolboxFX on page 200.
2. Click the Device Settings folder, and then click the Print Quality page.
3. In the area for Color Calibration, select the Calibrate Now check box.
4. Click Apply to calibrate the product immediately.
210 Chapter 3 Solve problems ENWW