Event-log messages
Print an event log
Print the event log
The event log is located on the configuration page (labeled Status Log) and lists the last five events.
1. Press the OK button to open the menus.
2. Use the arrow buttons to select the Reports menu, and then press the OK button.
3. Use the arrow buttons to navigate to the Configuration Report option, and then press the OK
button to print the report.
4. Press the cancel button
to exit the menus.
Event-log messages
NOTE: Unless otherwise noted, the event log messages in the following table do not have a
corresponding control-panel message.
Table 3-2 Event log only messages
Event log message Description
54.01 Environmental sensor error
54.06 Color density sensor error
54.14 Color plane registration sensor error
54.11 Black density out of range
54.1101 Cyan density out of range
54.1102 Magenta density out of range
54.1103 Yellow density out of range
54.1200 Black density measurement abnormality
54.1201 Cyan density measurement abnormality
54.1202 Magenta density measurement abnormality
54.1203 Yellow density measurement abnormality
54.21 Beam detect errors
54.25 Top-of-page sensor abnormality
ENWW Tools for troubleshooting 229
To Next Page
Loading...