To Next Page

To Previous Page

Computer Setup 5–5

Built-In Device Options ■ Enable/disable the wireless button state (enabled by default).

■ Enable/disable embedded WWAN device radio (select models only; enabled

by default).

■ Enable/disable embedded Bluetooth® device radio (enabled by default).

■ Enable/disable the Network Interface Controller (LAN) (enabled by default).

■ Set the wake on LAN state. Options include the following:

❐ Disabled

❐ Boot to Network (set by default)

❐ Follow Boot Order

■ Enable/disable the fingerprint device (enabled by default).

■ Enable/disable a modem device (enabled by default).

■ Enable/disable the embedded WLAN device (enabled by default).

■ Enable/disable LAN/WLAN switching (disabled by default).

■ Enable the ambient light sensor (enabled by default).

■ Enable/disable the Notebook Multibay device (enabled by default).

■ Enable/disable the integrated camera (select models only; enabled

by default).

Port Options (all are enabled by default)

✎

All port options are enabled by default.

■ Enable/disable the Smart Card slot.

■ Enable/disable the ExpressCard slot.

■ Enable/disable the serial port.

■ Enable/disable the parallel port.

■ Enable/disable the flash media reader.

■ Enable/disable the USB port.

Disabling the USB port also disables MultiBay devices and ExpressCard

devices on the advanced port replicator.

■ Enable/disable the 1394 port.

Set Security Level Change, view, or hide security levels for all BIOS menu items.

Restore Security Defaults Restore the default security settings.

Select To do this

Other manuals for HP Compaq 2230s

Questions and Answers:

Need help?

Do you have a question about the HP Compaq 2230s and is the answer not in the manual?

General