7. Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the
bezel.
Figure C-7 Retrieving the Front Bezel Security Screw
8. Replace the front bezel.
9. Install the security screw next to the middle front bezel release tab to secure the front bezel in
place.
Figure C-8 Installing the Front Bezel Security Screw
10. Replace the access panel.
11. If the computer was on a stand, replace the stand.
12. Reconnect the power cord and turn on the computer.
13. Lock any security devices that were disengaged when the access panel was removed.
56 Appendix C External Security Devices ENWW
To Next Page
Loading...
