HP Compaq 6520s Setup Guide

System Configuration menu
NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select To do this
Language (or press f2) Change the Computer Setup language.
Boot Options
●
Set an f9, f10, and f12 delay when starting up.
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot and set the
boot mode (PXE).
●
Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
Device Configurations
●
Swap the functions of the fn key and left ctrl key.
●
Enable/disable USB legacy support. When enabled, USB
legacy support allows the following:
◦
Use of a USB keyboard in Computer Setup even
when a Windows operating system is not running.
◦
Startup from bootable USB devices, including a hard
drive, diskette drive, or optical drive connected by a
USB port to the computer.
●
Enable/disable BIOS DMA data transfers.
●
Enable/disable fan always on while connected to an AC
outlet.
●
Enable/disable Data Execution Prevention. When
enabled, the processor can disable some virus code
execution, which helps to improve computer security.
●
Enable/disable SATA Native Mode.
●
Enable/disable Dual Core CPU.
●
Choose Bit-shift or LBA-assisted HDD Translation Mode.
●
Enable/disable Virtualization Technology.
Built-In Device Options
●
Enable/disable embedded WLAN Device Radio.
●
Enable/disable Wake on LAN.
●
Enable/disable the optical disc drive.
Port Options
●
Enable/disable the USB port.
●
Enable/disable the ExpressCard slot.
System Configuration menu 9

HP Compaq 6520s Specifications

General

Brand	HP
Model	Compaq 6520s
Category	Laptop
Language	English