Select To do this
●
Enable/disable embedded Bluetooth® device radio (enabled by default).
●
Enable/disable the Network Interface Controller (LAN) (enabled by default).
●
Set the wake on LAN state. Options include the following:
◦
Disabled
◦
Boot to Network (set by default)
◦
Follow Boot Order
●
Enable/disable the fingerprint device (enabled by default).
●
Enable/disable a modem device (enabled by default).
Port Options (all are enabled by
default)
NOTE: All port options are enabled by default.
●
Enable/disable the smart card slot.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables MultiBay devices and ExpressCard
devices on the advanced port replicator.
●
Enable/disable the 1394 port.
Set Security Level Change, view, or hide security levels for all BIOS menu items.
Restore Security Defaults Restore the default security settings.
108 Chapter 5 Computer Setup
To Next Page
Loading...
