HP Compaq 6530s Replacement Guide

Component replacement procedures
Display assembly
NOTE: All display assembly spare part kits include 2 WLAN antenna transceivers and cables.
Description Spare part number
For use only with HP Compaq 6535s Notebook PC models
14.1-inch, WXGA BrightView display assembly with camera
493155-001
14.1-inch, WXGA BrightView display assembly 493154-001
14.1-inch, WXGA display assembly with camera 493152-001
14.1-inch, WXGA display assembly 493151-001
For use only with HP Compaq 6530s and 6531s Notebook PC models
14.1-inch, WXGA BrightView display assembly with camera
491643-001
14.1-inch, WXGA display assembly with camera 491642-001
14.1-inch, WXGA BrightView display assembly 491641-001
14.1-inch, WXGA display assembly 491640-001
Remove the display assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Turn the computer upside down on a flat surface, with the battery bay toward you.
5. Slide the battery release latches (1) to release the battery.
ENWW Component replacement procedures 5

HP Compaq 6530s Specifications

General

Brand	HP
Model	Compaq 6530s
Category	Laptop
Language	English