Additional Features
Description
Computrace
Computrace agent support standard
Towerable Orientation
Product can be oriented as either a desktop or a tower
Drive Protection System
DPS Access through F10 Setup during Boot
A diagnostic hard drive self test. It scans critical physical components and every sector of
the hard drive for physical faults and then reports any faults to the user
Running independently of the operating system, it can be accessed through a Windows-
based diagnostics utility or through the computer's setup procedure. It produces an
evaluation on whether the hard drive is the source of the problem and needs to be
replaced
The system expands on the Self-Monitoring, Analysis, and Reporting Technology
(SMART), a continuously running systems diagnostic that alerts the user to certain types
of failures
SMART Technology (Self-Monitoring,
Analysis and Reporting Technology)
SMART I - Drive Failure Prediction
SMART II - Off-Line Data Collection
SMART III - Off-Line Read Scanning with
Defect Reallocation
SMART IV - End-to-End CRC for hard drives
Allows hard drives to monitor their own health and to raise flags if imminent failures were
predicted
Predicts failures before they occur. Tracks fault prediction and failure indication
parameters such as re-allocated sector count, spin retry count, calibration retry count
By avoiding actual hard drive failures, SMART hard drives act as "insurance" against
unplanned user downtime and potential data loss from hard drive failure
IOEDC: I/O Error Detection Circuitry
Detects errors in Read/Write buffers on HDD cache RAM
Interface in F10 setup provides confirmation of SMART IV support.
QuickSpecs
HP Compaq 8200 Elite Series
Technical Specifications
DA - 13879 Worldwide — Version 34 — November 26, 2012
Page 26
To Next Page
Loading...
Need help?
General
