9. To remove a memory module, press outward on the two latches on each side of the SODIMM
(1) then pull the SODIMM out of the socket (2).
Figure 2-5 Removing a Memory Module
10. To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1)
then press the SODIMM down (2) so that the latches lock it in place.
Figure 2-6 Installing a Memory Module
NOTE: A memory module can be installed in only one way. Match the notch on the module
with the tab on the memory socket.
10 Chapter 2 Hardware Repair and Upgrade ENWW
To Next Page
Loading...
