HP Compaq dx6120 ST - Computer Access and Case Handling

2-2 www.hp.com Hardware Reference Guide
Hardware Upgrades
Removing the Computer from the Stand
When accessing internal components, remove the computer from the
stand before removing the computer cover. To remove the computer
from the stand:
1. Turn off the computer properly through the operating system,
then turn off any external devices.
2. Disconnect the power cord from the power outlet and the
computer, and disconnect any external devices.
3. Lift the computer off the stand.
Removing the Computer from the Computer Stand
✎
Lay the computer on its side (with the computer cover facing up)
before removing the computer cover and installing hardware.