Table 4-2 OSD Menu (continued)
Icon Main Menu Submenu Description
Monitor Status Displays the operating status of the monitor each
time the monitor is powered on. Select the location to
display the status to:
●
Top
● Middle
●
Bottom
●
Off
The factory default is Top.
DDC/CI Support Allows the computer to control some OSD menu
features such as brightness, contrast and color
temperature. Set to:
● On
●
Off
The factory default is On.
Bezel Power LED Turns off the power LED on the front panel of the
monitor. The factory default is On.
Sleep Timer Provides the timer adjustment menu options:
●
Set Current Time—sets the current time in
hours and minutes
●
Set Sleep Time—sets the time you want to
place the monitor in sleep mode
●
Set on Time—sets the time you want the
monitor to wake up from sleep mode
●
Timer—sets the Sleep Timer feature On or Off.
The default setting is Off.
●
Sleep Now—immediately sets the monitor to
enter sleep mode
Language Selects the language in which the OSD menu is
displayed. The factory default is English.
Information Selects and displays important information about the
monitor.
Current Settings Provides the current input video mode.
Recommended
Settings
Provides the recommended resolution mode and
refresh rate for the monitor.
Serial Number Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
FW Version Reports the firmware version of the monitor.
Backlight Hours Reports the total hours of backlight operation.
Service Support
http://www.hp.com/support
Factory Reset Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
ENWW Adjusting the Monitor Settings 23
To Next Page
Loading...
Need help?
General
