To Next Page

To Previous Page

Table 4-2 OSD Menu (continued)

Icon Main Menu Submenu Description

Source Control Selects the video input signal. DP (DisplayPort) is

the factory default.

DisplayPort Selects DisplayPort as the video input signal.

DVI Selects DVI as the video input signal.

VGA Selects VGA as the video input signal.

Default Source Selects the default or primary video input signal

when the monitor is connected to two active and

valid video sources. The monitor will automatically

determine the video format. The choices are:

●

DisplayPort

●

DVI

●

VGA

The factory default is DisplayPort.

Auto-Switch Source Turns the system's automatic video signal input to

On or Off. The factory default is On.

Source Detection This option is displayed in the OSD when a

DisplayPort input is selected. You can set Source

Detection to:

●

Always Active

● Low Power

The factory default is Low Power.

Exit Exits the OSD menu screen.

24 Chapter 4 Operating the Monitor ENWW

Other manuals for HP Compaq LA2006x

Questions and Answers:

Need help?

Do you have a question about the HP Compaq LA2006x and is the answer not in the manual?

General