Hardware Setup
Getting Started 1–5
Connecting the Modem to an RJ-11 Jack
To connect the modem to an analog telephone line that
has
an RJ-11 telephone jack:
✎
Telephone wall jacks and modem cables vary in appearance by
region and country.
1. Turn the notebook display-side up on a flat surface near
an
RJ-11 telephone wall jack.
2. If your modem cable has noise suppression circuitry 1,
which prevents interference with TV and radio reception,
orient the circuitry end of the cable toward the notebook.
Å
To avoid the risk of electric shock, fire, or damage to the
equipment, do not plug a modem cable into a network jack.
3. Plug the modem cable into the RJ-11 (modem) jack 2 on the
notebook.
4. Plug the other end of the modem cable into the telephone wall
jack
3.
To Next Page
Loading...
Need help?
General