EasyManuals Logo

HP Compaq NC6320 Supplementary Guide

HP Compaq NC6320
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Drives 3–1
3
Hard drive
Replacing the hard drive
Ä
CAUTION: To prevent system lockup and loss of information:
Shut down the computer before removing the hard drive from the
hard drive bay. Do not remove the hard drive while the computer is
on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation,
turn the computer on by pressing the power button. Then shut
down the computer through the operating system.
Your computer may look slightly different from the
illustrations in this chapter.
To remove the hard drive:
1. Save your work.
2. Shut down the computer and close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove the battery pack from the computer.

Other manuals for HP Compaq NC6320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq NC6320 and is the answer not in the manual?

HP Compaq NC6320 Specifications

General IconGeneral
Operating SystemWindows XP Professional
ProcessorIntel Core Duo T2400 (1.83 GHz)
RAM512 MB
Display1024 x 768 ( XGA )
GraphicsIntel GMA 950
Optical DriveDVD-ROM
Battery6-cell Lithium Ion
Ports3 x USB 2.0
Wireless802.11a/b/g

Related product manuals