HP Compaq nx5000 series - Memory Module

5–24 Maintenance and Service Guide
Removal and Replacement Procedures
5.11 Memory Module
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.8).
3. Press in on the latch to release the memory shield and lift
the left side of the memory shield 1 until it rests at a
45-degree angle.
4. Slide the shield to the left 2 to remove it.
✎
The memory shield is included in the Miscellaneous Plastics
Kit, spare part number 353393-001.
Removing the Memory Shield
Spare Part Number Information
Memory modules, 266-MHz
1024-MB DDR
512-MB DDR
256-MB DDR
128-MB DDR
336579-001
336578-001
336577-001
336576-001