Need help?Do you have a question about the HP Compaq NX7400 and is the answer not in the manual?
General| Graphics | Intel GMA 950 |
|---|---|
| Wireless | 802.11a/b/g |
| Battery | 6-cell Lithium-ion |
| RAM | Up to 4GB DDR2 SDRAM (2 slots) |
| Display | 15.4-inch WXGA (1280 x 800) |
| Operating System | Windows XP Professional |
| Chipset | Mobile Intel 945GM Express |
| Optical Drive | DVD/CD-RW Combo, or DVD+/-RW |
| Networking | 10/100 Ethernet |
| Ports | 3 USB 2.0, VGA, RJ-45, RJ-11 |
| Storage | 60 GB HDD |
| Hard Drive | 60 GB HDD |
Instructions for connecting a USB device to the computer, including detection.
Procedure to safely remove a USB device to prevent data loss or system issues.
Information on additional software requirements for certain USB devices.
Enabling or disabling USB legacy support for startup and external MultiBay access.
Steps to connect a 1394 device to the computer via the 1394 port.
Procedure for safely removing a 1394 device to prevent data loss or system issues.
Information on additional software requirements for 1394 devices.
Connect the computer to an optional docking device using the bottom docking connector.
To Next Page
