To Next PageTo Next Page
Need help?Do you have a question about the HP Compaq NX6120 and is the answer not in the manual?
Lists available processors, displays, storage, memory, OS, keyboard, touchpad, ports, etc.
Describes steps to clear CMOS and passwords by removing the RTC battery.
Details features like Standby, Hibernation, hotkeys, calibration, and ACPM compliance.
Identifies and describes ports and features on the notebook's front, right, left, and rear panels.
Provides a high-level view of key parts, features, and system board connections.
Explains the system information and customization utility, accessed via Main, Security, Advanced, Tools menus.
Lists various flowcharts for diagnosing specific issues like no power, no video, or OS loading problems.
Shows where to find the notebook's serial number for support.
Provides an exploded view and numerical list of major notebook parts.
Details parts like RTC battery, covers, and feet.
Lists various internal cables for notebook components.
Lists specifications and part numbers for hard drives and optical drives.
Lists accessories and parts not shown in diagrams, like AC adapters and carrying cases.
An index of spare parts by part number for easy reference.
Lists essential tools needed for disassembly and reassembly procedures.
General advice on handling plastic parts, cables, and connectors during service.
Precautions for handling fragile drives to avoid damage or data loss.
Explains the risks of ESD and how it affects electronic components.
Guidelines for safe packaging and transport of equipment, focusing on grounding.
Grounding and handling precautions for static-free workstations.
Details on wrist straps, foot straps, and grounded mats for ESD prevention.
How to report the notebook serial number for service.
A table guiding users to the correct section for removing specific components.
Initial steps before starting any service procedure.
Procedure for replacing adhesive rubber pads.
Steps for removing and replacing the Bluetooth module.
Procedure for removing and replacing memory modules.
Steps for removing and replacing wireless or communication cards.
Procedure for removing and replacing the optical drive.
Steps for removing and replacing the notebook keyboard.
Procedure for removing the top switch cover assembly.
Steps for removing the LED board (applies to full-featured models).
Procedure for removing and replacing the internal cooling fan.
Steps for removing and replacing the heat sink assembly.
Procedure for removing and replacing the CPU.
Steps for removing and replacing the internal modem board.
Procedure for removing and replacing RAM modules.
Steps for removing and replacing the Real-Time Clock battery.
Procedure for removing and replacing the entire display panel.
Steps for removing the main top casing of the notebook.
Procedure for removing and replacing the internal speakers.
Steps for removing the digital media reader board.
Procedure for removing the USB/Audio interface board.
Steps for removing and replacing the motherboard.
Procedure for removing the serial port connector module.
Details pin configurations for audio, USB, serial, parallel, and video ports.
Specifies requirements for power cords, including general and country-specific standards.
Provides a detailed list and images of all screws used in the notebook assembly.
General
