HP Compaq nx5000 series - Page 146

5–38 Maintenance and Service Guide
Removal and Replacement Procedures
10. Turn the notebook right-side up, with the front toward you.
11. Open the notebook until the display assembly is in an
upright position.
12. Lift the display assembly 1 straight up to remove it.
13. If necessary, remove the left and right display hinge covers 2
from the display assembly.
✎
The display hinges, hinge covers, hinge screw caps, and
display bumpers are included in the Miscellaneous Plastics Kit,
spare part number 353393-001.
Removing the Display Assembly
Reverse the above procedure to install the display assembly.