5–40 Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the following screws:
❏ Ten T8M2.5×9.0 screws 1 along the front edge, sides,
rear corners and center of the bottom of the notebook.
❏ Three T8M2.5x3.0 screws 2 from the MultiBay.
❏ Two T8M2.5×3.0 screws 3 from the hard drive bay.
❏ Two T8M2.5×5.0 screws 4 from the rear panel.
Removing the Top Cover Screws
To Next Page
Loading...
