HP ProtectTools Security
Manager
HP ProtectTools Security Manager is the security platform for business notebooks and desktops. The HP
ProtectTools Security Manager is an extensible client security console that delivers enhanced security
capabilities through add-on software modules. Modules currently available are:
- Smart Card Security for HP ProtectTools
- BIOS Configuration for HP ProtectTools
- Embedded Security for HP ProtectTools
- Credential Manager for HP ProtectTools
- Device Access Manager for HP ProtectTools
Security
Standard Features
HP ProtectTools Security Manager
Configuration Control Hardware
Memory Change Alert
HP Biometric Fingerprint Sensor
Ownership Tag
Setup Password
Power-On Password
DriveLock
TPM 1.2 Embedded Security Chip*
TPM Enhanced DriveLock*
HP Disk Sanitizer
Enabled for PC Smart Card options
Kensington Lock Slot
Support for Computrace / LoJack for Laptops (must be purchased separately)
Optional Features
Smart Card Reader
(replaces Type I/II PC Card
slot)
Compatible with ISO 7816 compliant Smart Cards
PC/SC interface support
* TPM module disabled where use is restricted by law; for example, Russia.
For more information on HP security solutions refer to
http://www.hp.com/go/security
.
Power Supply
External 65-watt Smart AC adapter, 6-foot (1.8-meter) power cord included.
Total length including External AC adapter is 12 feet (3.66 meter).
HP Fast Charge Technology*
*Fast Charge Technology recharges your battery up to 90% within 90 minutes when the system is off. Fast Charge Technology does
not apply to 12-cell Ultra-Capacity batteries.
Battery
Primary Battery
52Wh 6-cell high capacity Lithium-Ion
Optional HP 8-Cell
Extended Life Battery
52Wh 8-cell high capacity Lithium-Ion
Optional HP 12-Cell Ultra-
Capacity Battery
95Wh 12-cell high capacity Lithium-Ion
QuickSpecs
HP Compaq nx6320/nc6320 Notebook PCs
Standard Features
DA - 12428 North America — Version 22 — August 31, 2007
Page 8
To Next Page
Loading...
Need help?
General
