English 7
HP 15” Color Monitor User’s Guide
Using Your Monitor
Recall Factory Settings
To revert to the default settings for all video modes, verify that the shift
LED is ON, and press the recall button.
Adjusting the Size and Position of the Displayed Image
When making the following adjustments, verify that the shift LED is
switched OFF.
Horizontal Size
To adjust the horizontal size of the displayed image, press the
button, then use the and adjustment controls.
Horizontal Position
To adjust the horizontal position of the displayed image, press the
button, then use the and adjustment controls.
Vertical Size
To adjust the vertical size of the displayed image, press the button,
then use the and adjustment controls.
Vertical Position
To adjust the vertical position of the displayed image, press the
button, then use the and adjustment controls.
Adjusting the Shape of the Displayed Image
Shift Key
Adjustments to the shape of the displayed image are performed using a
second level of controls. To access this second level press the
button. This shift LED is illuminated to show that you are using the
second level controls.
Trapezoid Correction
To adjust the displayed image if its vertical edges do not appear parallel,
press the button, then use the and adjustment controls to
correct the distortion.
Pincushion Correction
To adjust the displayed image if its vertical edges appear to bow in or
out, press the button, then reshape using the and
adjustment controls.
kiska1.bk : kiska-us.fb4 Page 7 Wednesday, April 22, 1998 9:22 PM
To Next Page
Loading...
Need help?
General
