8
What are the steps necessary to execute the HPQFlash utility?
The HPQFlash application is executed in the Windows environment by selecting the
HPQFlash.exe file. The initial HPQFlash application window will be presented as follows
reminding the user that additional applications should be closed before proceeding.
The user must have administrative privilege on the PC to proceed with the BIOS update.
Otherwise, the application will respond with a warning message and exit without updating
the BIOS image. If the PC has an administrative or setup password configured, HPQFlash
will require the user to enter the setup password before the BIOS can be successfully updated.
If the user selects the Next button, entered the correct password (if needed), and has the
appropriate rights, the application will interrogate the current PC BIOS image and compare it
to the BIOS image file (ROM.CAB) in the same directory as the FLashbin.exe. If the BIOS
image file is not applicable to the PC, a warning message will be displayed. If the image is
applicable, HPQFlash will display the current BIOS and the BIOS version contained in the
ROM.CAB file.
To Next Page
Loading...
