HP Designjet 430 - Page 119

430
6–9
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 6–9 (seq: 119)
This is the black on page 6–9 (seq: 119)
10 Move the cartridge carriage out of the service station. Then remove the cover from
the three left-hand cartridge slots by first squeezing on both sides, and then lifting
it off.
2
1
1
11 Remove the cover from the three left-hand cartridge selectors.
a Release the clip on the right side of the cover, at the bottom. This is easiest to
see when looking down into the printer.
b Lift the cover off.
2
1
Reconfiguring your printer
To upgrade the HP DesignJet 430 with color
RECONFIG–
6 URATION
Localization Note.