To Next PageTo Next Page
Need help?Do you have a question about the HP Designjet 430 and is the answer not in the manual?
General| Product Type | Large format printer |
|---|---|
| Print Technology | Thermal inkjet |
| Maximum Print Width | 24 inches |
| Media Sizes | A4, A3, A2, A1, A0 |
| Operating Systems Supported | Windows |
| Media Types | Paper (plain, coated, vellum), translucent bond, polyester film |
| Ink Colors | 4-color (CMYK) |
Explains the meaning of symbols used to identify different types of information.
Explains how to print and use the Setup Sheet for configuration.
Details the printer's memory and available expansion modules.
Provides a quick setup guide for specific requirements.
A checklist to guide the user through the setup tasks.
Ensures all necessary supplied and not supplied items are present.
Step-by-step instructions for installing a memory expansion module.
Guidance on placing the printer on a stable surface.
Instructions for powering on the printer.
Detailed steps for inserting print cartridges into the printer.
Procedure for changing the printer's internal language.
Instructions for connecting the printer via parallel or serial interface.
Explains how to print and use the Setup Sheet to configure settings.
Guidance on setting up the printer within application software.
How to print a sample or demonstration print for verification.
Tips on handling media to ensure optimal print quality.
Guidance on selecting the appropriate media type for print requirements.
Specific recommendations for print quality and media combinations.
Common media choices based on application type.
Specifies how to indicate sheet or roll loading to the printer.
Instructions on specifying media type and print quality.
Step-by-step guide to loading sheet media.
Procedure for realigning sheet media if alignment fails.
Instructions for loading and changing roll media.
Steps for feeding roll media into the printer.
How to load a sheet when the roll-feed option is installed.
Information on unloading media, including drying times.
Procedure for removing a sheet after printing.
How to remove a sheet when printing is not finished.
Instructions for cutting and removing a print from a roll.
Overview of print appearance controls like page size and orientation.
Defines how the printer emulates sheet media size.
Explains how page size settings affect print clipping.
Instructions on how to rotate drawings using the Setup Sheet.
Details how the Rotate feature interacts with software and causes clipping.
How to print a mirror image of a drawing without software changes.
Explains the Merge feature for handling overlapping lines.
How to set logical pen characteristics like width and color.
Guidance on printing color drawings in monochrome.
Key considerations for monochrome printing.
How to control overall print quality from the front panel.
Instructions for adjusting print quality settings via the front panel.
Procedure for cancelling a print in progress.
How to print another copy of the last print.
Using the Form Feed key to advance or cut media.
Explains the purpose and printing method for pre-defined prints.
Procedure for printing and using the Black Cartridge Alignment Sheet.
Procedure for printing and using the Color Cartridge Test Sheet.
Guide to printing and interpreting the Print Quality Test Print.
How to print and interpret the Setup Sheet for printer configuration.
Instructions for adjusting serial interface settings.
Changing graphics language for compatibility with specific applications.
Adjusting the I/O timeout setting for file completion.
Information on available memory expansion modules.
Connecting the printer to a LAN using an HP JetDirect EX interface.
Steps to upgrade the HP DesignJet 430 monochrome to color.
Procedure for recalibrating the printer for optimal accuracy.
When and how to replace print cartridges.
Step-by-step instructions for replacing cartridges.
Procedure for manually clearing clogged print nozzles.
Instructions for cleaning the exterior of the printer.
Explains the meaning of the printer's status and error lights.
Summarizes the purpose and access method for front-panel keys.
Guidance on using the manual and driver documentation.
Steps to identify whether the problem lies with the printer or computer.
Troubleshooting issues related to loading and handling media.
Procedure for safely removing jammed media.
Diagnosing and resolving communication issues between computer and printer.
Troubleshooting issues with print output position and content.
Diagnosing and resolving common print quality issues.
Resolving issues like the printer not printing or being too slow.
Information on obtaining support from Hewlett-Packard.
Technical details of the HP DesignJet printers.
Operating and storage environmental requirements.
Information on energy efficiency and materials used.
Compliance information regarding electromagnetic compatibility.
Safety compliance information for the printer.
Details on parallel and serial interface specifications.
Information on available interface cables and their specifications.
Notices regarding FCC, EMC, and other regulatory compliance.
Formal declaration of product compliance with relevant directives.
List of available accessories and their part numbers.
Guidance on ordering supplies and accessories.
