2–26
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 2–26 (seq: 68)
This is the black on page 2–26 (seq: 68)
To unload a sheet at the end of a print
1 When the Load Media light comes on (not flashing), the print is finished.
2 Then simply pull the sheet downwards to remove it from the printer.
To unload a sheet under any other circumstances
Press Form Feed, wait for the sheet to be ejected and then simply pull it
downwards to remove it from the printer.
Working with media
Unloading media
Localization Note.
LOAD MEDIA
This is the green on page 2–26
(seq: 68)
FORM FEED
To Next Page
Loading...