EasyManua.ls Logo

HP Designjet 430 - To replace one or more cartridges

HP Designjet 430
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This is the green on page 7–5 (seq: 127)
This is the yellow on page 7–5 (seq: 127)
This is the magenta on page 7–5 (seq: 127)
This is the cyan on page 7–5 (seq: 127)
7–5
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 7–5 (seq: 127)
This is the black on page 7–5 (seq: 127)
To replace one or more cartridges
1 Access the cartridge carriage.
a Leave the printer switched on.
b Open the cover and push it right back.
c If necessary, wait for the cartridge carriage to move to the service station on the
left.
Cover open
Cartridge
carriage in
service
station
2 Remove the cartridge to be replaced.
a Press down lightly and then pull the cartridge towards you.
b Remove the cartridge from its stall. Discard it if it is empty or defective.
1
2
450C
430
1
2
455CA
MAINTENANCE
7
Maintaining your printer
Replacing cartridges
Localization Note.

Other manuals for HP Designjet 430

Related product manuals