1–3
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 1–3 (seq: 19)
This is the black on page 1–3 (seq: 19)
5 Choose your driver disk(s), read the instructions on the label and follow the printed
instructions that were shipped with the driver.
That’s all!
Setup checklist
Having unpacked and assembled the printer, you can use the checklist below as
you complete each task explained in this chapter.
Task
Page
Done? (n)
1
Check that you have all the items required 1–4
2
(Optional) Install a memory expansion module 1–6
3
Position the printer 1–8
4
Switch on 1–9
5
Load the print cartridge(s) 1–10
6
(Optional) Change the language 1–14
7
Connect the printer to your computer 1–17
8
(Optional) Configure the printer 1–19
9
Set up the printer in your application software 1–24
10
Send a sample or demonstration print 1–26
Localization Note.
SETUP
1
Setting up your printer
Setup checklist
To Next Page
Loading...