1–6
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 1–6 (seq: 22)
This is the black on page 1–6 (seq: 22)
Task 2: (Optional) Install a memory expansion module
For details of the memory modules available, see page 10–17. You may install
only one.
1 Make sure that the printer is switched OFF and that neither the power cord nor an
interface cable is connected.
2 Unscrew the cover plate at the back of the printer, and remove it.
Localization Note.
Setting up your printer
Task 2: (Optional) Install a memory expansion module
To Next Page
Loading...