HP Designjet 430 - To change the print quality on the front panel

3–16
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 3–16 (seq: 86)
This is the black on page 3–16 (seq: 86)
To change the print quality on the front panel
Use the front-panel Print Quality key to toggle between the three print quality
settings.
For details of each print quality level, see the table on the previous page.
The setting also affects the printer’s internal demonstration prints.
You cannot change the print quality setting for a print already received by the
printer.
Controlling a print’s overall appearance
Choosing an appropriate print quality
Localization Note.
PRINT QUALITY