1–14
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 1–14 (seq: 30)
This is the black on page 1–14 (seq: 30)
Task 6: (Optional) Change the language
All the printer’s internal prints are available in the following languages: English,
French, Italian, German, Spanish, Portuguese and Japanese. By default, the
language is English. If English is what you want, then you can skip this task and
go to task 7.
To change from English to any of the other languages, you must use the printer’s
Setup Sheet, as explained below.
1 Load a sheet of A-size or A4-size plain paper, in portrait orientation. For help on
how to load a sheet, either refer to the pictures on the right-hand side of the
printer’s media-entry slot, or see the section starting on page 2–9. Don’t forget to
check that the Media Source is set to
Sheet.
When the
Ready light is on, you have loaded the sheet correctly.
Print will be on underside
Localization Note.
Setting up your printer
Task 6: (Optional) Change the language
To Next Page
Loading...