1–15
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 1–15 (seq: 31)
This is the black on page 1–15 (seq: 31)
2 Make sure the front-panel Media Type is set to Paper. If necessary, press the
Media Type key until the Paper light is on.
3 Press
Setup.
4 When the print has finished, wait until the Load Media light comes on and the
printer ejects the sheet. Remove the sheet.
PAPER
MEDIA TYPE
Localization Note.
SETUP
1
Setting up your printer
Task 6: (Optional) Change the language
This is the green on page 1–15
(seq: 31)
SETUP
This is the green on page 1–15
(seq: 31)
LOAD MEDIA
To Next Page
Loading...