This is the magenta on page 9–7 (seq: 147)
9–7
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 9–7 (seq: 147)
This is the black on page 9–7 (seq: 147)
4 Carefully remove any torn pieces from inside the printer. Be careful not to touch
the plastic strip that runs the length of the printer behind the cartridge carriage; its
edge is very sharp.
Media torn
5 Lower the bail, raise the media-lever, lower the cover, and switch on the printer.
Bar lowered
Media lever
raised
3
6 On the front panel, press Form Feed to eject any pieces of media that are still in
the media path.
Localization Note.
TROUBLE–
9
SHOOTING
Troubleshooting
Clearing a media jam
To Next Page
Loading...