1–21
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 1–21 (seq: 37)
This is the black on page 1–21 (seq: 37)
Software
4xx
For an explanation of all the parameters
on this sheet, see the User’s Guide.
RAM: 4MB Standard + 14MB SIMM
Firmware Revision: A.69.69 (LD)
7. Cutter
Enabled
Disabled
450C/455CA
450C/455CA
SETUP
1
Setting up your printer
Task 8: (Optional) Configure the printer
Localization Note.
To Next Page
Loading...