4-22
Service Tests and Utilities
HP Designjet 4500 Printer Series Service Manual
Error Code 01.0:10. For more information on troubleshooting this error
code, refer to Page 2-3.
Starting Feed Motor 2.
If there is a failure at this point, the Front Panel will display System Error
Code 41.2:10. For more information on troubleshooting this error code,
refer to Page 2-14.
35 The following message will appear on the Front Panel. Remove the media if
it is still loaded.
36 When the PWM check is being performed, the following message will be
displayed on the Front Panel:
PWM test without paper.
37 Once the PWM check is done, the results will be displayed on the Front
Panel. Press any key to finish the test:
If there is a failure at this point, the Front Panel will display:
38 A message will appear on the Front Panel asking whether you would like to
run the BT Arm 1 and Feed Roller 1 tests with paper. Select Yes or No by
To Next Page
Loading...
