HP Designjet 4500 Series - Page 48

2-18
System Error Codes
HP Designjet 4500 Printer Series Service Manual
System Error: 51.5:10
Problem
Description:
An error with the Roll 1 Drawer Right Sensor has been detected.
Corrective Action: Try the following:
 Check that the Roll 1 Right Drawer Sensor cable is not damaged and is
correctly connected to the Interconnect PCA.
 Replace the Roll 1 Drawer Right Sensor ⇒ Page 8-177.
System Error: 51.6:10
Problem
Description:
An error with the Roll 2 Right Drawer Sensor has been detected.
Corrective Action: Try the following:
 Check that the Roll 2 Right Drawer Sensor cable is not damaged and is
correctly connected to the Interconnect PCA.
 Replace the Roll 2 Right Drawer Sensor ⇒ Page 8-217
System Error: 53.1:10
Problem
Description:
Back Channel Media Sensor error.
Corrective Action: Try the following:
 Check that the Back Channel Sensor cable is not damaged and is
correctly connected to the Interconnect PCA.
 Replace the Back Channel Sensor ⇒ Page 8-98.
System Error: 53.2:10
Problem
Description:
Single Sheet Media Sensor error.
Corrective Action: Try the following:
 Check that the Single Sheet Sensor cable is not damaged and is correctly
connected to the Interconnect PCA.
 Replace the Single Sheet Sensor ⇒ Page 8-117.
System Error: 53.3:10
Problem
Description:
An error with the Roll 1 Sensor has been detected.
Corrective Action: Try the following:
 Check that the Roll 1 Sensor cable is not damaged and is correctly
connected to the Interconnect PCA.
 Replace the Roll 1 Media Sensor ⇒ Page 8-175.