NOTE: If more than one printer of the same model number is installed on
the system, the name of the second printer added is denoted by “#2”, the third
by “#3”, and so on.
Delete a printer
To delete an HP Designjet printer from the printer list in your scanner software:
1. Press the Setup tab.
2.
Press the Printer button, and then press the Tool button
. The Printer
Setup dialog box appears.
3. Press the Delete button.
Create a new media profile
Before starting the following procedure, make sure that you have color-calibrated
the scanner (see
Calibrate the scanner on page 47) and make sure that the media
profile you intend to create does not already exist in the media profile list.
6 Chapter 2 Basic Operations
Basic Operations
HP DesignJet Information Engineering
To Next Page
Loading...
