5. Press the Print Color Sheet button to print a color patch reference sheet.
Some printers print a special test sheet just before printing the color sheet. Do
not use the test sheet—only use the color sheet (shown below).
6. Press the Scan Sheet button to scan the color sheet.
NOTE: Some HP Designjet models require that you enter the media profile
name when the system is connected through the LAN.
7. Load the color sheet into the scanner face down. Align the arrow on the color
sheet with the arrow on the center of the scanner.
8. Press the OK button to initiate the scan.
9. Press the OK button when this message appears.
The media profile is active and visible in the list of available media profiles.
Create a new media profile
9
Basic Operations
HP DesignJet Information Engineering
To Next Page
Loading...
