accessed throughout the network, from any computer running any operating
system.
12.
Press the Scan to file button
to start the scan-to-file process and
save the image.
13. To view or delete the resulting file, see
View, move, rename, or delete a file
on page 28.
Scan a document to the network
By default, your scanner’s file manager only displays local drives and folders. This
topic explains how to add network connections, how to use the network locations
as file destinations for scan-to-file jobs, and how to access them with the file
manager.
NOTE: To scan a document to a computer or server on the network, the
destination computer or server must have all firewalls disabled and the destination
folder must be a shared folder.
Add a network connection
Verify that your system is connected to the network.
1.
Press the Folder button
to open the File Manager dialog box.
2. Press the Network button.
3. Press the Add Network Connection button. The Add Network
Connection dialog box appears:
Contact your network administrator if you require additional information about
one or more of the settings described in the following steps.
Scan a document to the network
23
Basic Operations
HP DesignJet Information Engineering
To Next Page
Loading...
