In order to establish a connection over the network, you need to know the IP address
of your scanner system. Follow these steps to obtain the IP address:
1. Press the Setup tab.
2. Press the Options button.
3. Press the General button.
4. Press the About button.
The scanner's IP address is shown in the About box.
Accessing the shared folder from Windows XP
1. On your computer's desktop, double-click My Network Places.
2. In the Network Places window, double-click Add Network Place.
3. In the Add Network Place Wizard window, click Choose another network
location, and then click Next.
4. In the Internet or network address field, enter http://scanner_ip/
images (where “scanner_ip” is the IP address of your scanner system), and
then click Next.
5. Enter a name for the folder on this computer, and then click Next.
To access the shared folder subsequently, double-click My Network Places. The
new folder appears in the Network Places window. You can drag the folder to your
desktop for easier access.
Accessing the shared folder from Windows 2000
1. On your computer's desktop, double-click My Network Places.
2. In the Network Places window, double-click Add Network Place.
Access the shared folder from my computer
35
Basic Operations
HP DesignJet Information Engineering
To Next Page
Loading...
