A warning message appears on the panel PC touch screen
Under the following circumstances, a warning message might appear on the panel
PC touch screen, advising the user to perform maintenance:
●
Scanner maintenance has not been performed within the last 30 days.
●
The lamp intensity diminishes.
NOTE: If you replace the lamp, you should also replace the filter.
●
The condition of the glass plate has deteriorated beyond an acceptable level.
●
The condition of the original background has deteriorated beyond an
acceptable level.
If you see any of these warnings displayed on the panel PC touch screen, consult
the scanner's online guide for information on recommended maintenance
procedures.
The scanner software is in the wrong language
To change the scanner software language, follow these steps:
1. Press the Setup tab.
2. Press the Options button.
3. Press the System button.
4. Press the Advanced button.
5. Press the Change Language button.
6. Select your preferred language.
The scanner software does not start
If your scanner system software does not start up when you turn on the touch
screen, trying turning it off and then turning it on again.
A warning message appears on the panel PC touch screen
55
Troubleshooting
HP DesignJet Information Engineering
To Next Page
Loading...
