4-37
Service Tests and Utilities
HP Designjet 4500 Printer Series Service Manual
27 When the Front Panel displays the following message, open the Ink
Cartridge Door and check that all the Ink cartridges are correctly installed.
Press any key to continue.
28 The Printer will continue with the ISS Communication test and the following
messages will be displayed on the Front Panel:
Starting ISS Ink Sup.
If there is a failure at this point, the Front Panel will display
System Error
Code 13.n:10
. For more information on troubleshooting this error code, refer
to Page 2-7. Check also
System Error Code 01.2:10
(refer to Page 2-4) or
System Error Code 01.0:10
(refer to Page 2-3).
Getting ISS data.
If there is a failure at this point, the Front Panel will display
System Error
Code 74:00
. For more information on troubleshooting this error code, refer to
Page 2-24.
Checking ISS Ink Sup.
If there is a failure at this point, the Front Panel will display
System Error
Code 26.n:10
. For more information on troubleshooting this error code, refer
to Page 2-10. Check also
System Error Code 13.n:10
(refer to Page 2-7).
29 Once the test is completed, OK will be displayed on the Front Panel.
To Next Page
Loading...
