4-62
Service Tests and Utilities
HP Designjet 4500 Printer Series Service Manual
Code 38.7:10.
For more information on troubleshooting this error code,
refer to Page 2-18.
Check also System Error Code 38.1:10.
For more
information on troubleshooting this error code, refer to Page 2-36.
8 When the following message is displayed on the front panel, Lower the Tray
Full Sensor and press any key to continue.
9 When the following message is displayed on the front panel,
open the
Stacker Cover and press any key to continue.
If there is a failure at this point, the Front Panel will display System Error
Code 38.9:10.
For more information on troubleshooting this error code,
refer to Page 2-36.
Check also System Error Code 38.1:10.
For more
information on troubleshooting this error code, refer to Page 2-36.
10 When the following message is displayed on the front panel,
close the
Stacker Cover and press any key to continue.
11 The front panel will display the following:
Checking that the Stacker Engaged Sensor is on.
If there is a failure at this point, the Front Panel will display System Error
Code 38.A:10.
For more information on troubleshooting this error code,
refer to Page 2-36.
Check also System Error Code 38.1:10.
For more
information on troubleshooting this error code, refer to Page 2-36.
To Next Page
Loading...
