8-57
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
8. Remove the Carriage PCA from the Printer.
Once you have installed a NEW Carriage PCA, you MUST perform the
following steps to ensure that the Printer will function correctly:
1. Power ON the Printer.
2. Execute the "Carriage Setup" Utility from
the Service Utility Menu (Refer to Chapter
4 for more information).
3. Install the Printheads once the Utility has
been completed successfully.
4. Reset life counter Carriage PCA
⇒
Chapter
4.
To Next Page
Loading...
