HP Designjet 4500

8-71
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
Printer Interconnect PCA
Removal
Switch off the product and remove the power cable.
1. Remove the Rear Door
⇒ Page 8-23 .
2. Remove the Left Connector Cover
⇒ Page
8-26
.
3. Remove the JetDirect Card (if installed).
4. Remove three T-15 screws (Type A) that
secure the Main PCA cover.
5. Remove the Main PCA Cover from the
Printer.
1
2