8-149
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
Roll 1 Right Spindle Support
Removal
Switch off the product and remove the power cable.
1. Remove the Roll 1 Right Drawer Cover
⇒
Page 8-138
2. Remove the Roll 1 Left Drawer Cover
⇒
Page 8-140
3. Remove the Roll 1 Drawer
⇒
Page 8-142
.
4. Remove the Roll 1 Bar
⇒
Page 8-147
.
5. Remove three T20 screws (Type A) that
secure the Right Spindle Support from the
Roll 2 Drawer.
6. Remove the Right Spindle Support
To Next Page
Loading...
