8-162
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
Roll 1 Feed Roller Assembly
Removal
Switch off the product and remove the power cable.
1. Remove Roll 1 Module (Front Path)
⇒
Page
8-151
.
2. Remove the Roll 1 Media Feed Motor
⇒
Page 8-158
3. Turn the Roll 1 Module upside down.
4. Remove two T15 screws (Type G) that
secure a cover from inside the right side of
the Roll 1 Module.
5. Remove the cover.
To Next Page
Loading...
