Print is Distorted or Unintelligible
• The interface cable between your computer and the printer could be faulty. Try another cable to see if the
problem is corrected.
• If you have connected your computer to the parallel port on the printer, make sure you are using a genuine HP
parallel interface cable.
• Depending on the software, drivers and RIPs you are using with your printer, there will be different solutions to
solving this problem. Refer to the Vendor’s User Documentation for details.
One Image Overlays Another on the Same Sheet
• The I/O Setup / I/O Timeout setting may be too long. From the front-panel menu decrease the setting and print
again.
To Next Page
Loading...